PRODUCT DESCRIPTION

These composite fencing boards, are the hard wearing type, made from the same material / strength as the composite decking. The tongue and groove fit ensures stability, and with the option of a top design detail with a 20cms board ( as image ). No maintenance required and you have the option to make the fence as high as you like. Steel post holder and composite post ensures a solid fence that will last a lifetime. 

The boards also have a plain smooth side as well as a slatted line effect on the other side so you can choose the look you prefer.

These boards are not the lightweight PVC fencing ( which can be damaged/ broken easily)  that is available through other sellers

The post are designed to be drilled onto a floor level concrete base and not sunk into the ground.

Each post will have 3 groves for the boards, to enable a long run or a corner fitting panel.

The composite boards will discard a bit of oil over the first few months whilst exposed to the elements, and they will finish off a tab shade lighter. 

Order you sample for quick delivery, so you can see before you purchase.

PRODUCT FEATURES:

No / low maintenance
No visible screws
Weather resistant
Will not rot , warp or split
Very Strong boards, post, edge trims and fitting.  Not PVC .

PRODUCT COMPONENTS:

* Main board – 1750mm wide x 180mm tall x 22mm deep, 10 boards will make a 6ft tall fence.

* Top board -  1750mm wide x 90mm tall x 22mm deep, you can use replace 2 of the main boards and use 3 of these to give the fence a design feature.

* Composite Post – 1800.mm high require 1 per fence ( and an additional 1 for the whole project)

* Steel bracket For post – Require 1 to secure the post to the ground

* post cap –  Top  cap for post , require 1

* Aluminum top/bottom trim – 1750mm long, these bars go at the start and top of the fence to make the whole structure more rigid being aluminum and to leave the fence with a clean edge. Require 2 per fence.

* Corner clip – These fit into the aluminum trim to secure the fence panel, so that they cannot be removed. Require 4 per fence panel

* Spacing bars – Only use these if you are purchasing the fence panel with spacer design, as these spaces created the gap, require 12 per fence.

* Screws – These are used on the corner clips, require 8 per fence panel

* Fixings – These are used to hold post steel bracket, require 4 per bracket

PRODUCT PURCHASE OPTIONS:

Full Board Fence Panel 6ft wide  x 6ft tall – this is a full panel fence and will include the below;
10 x main boards at 180mm high
1 x Composite post
1 x Steel bracket For post
1 x post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings

( Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)

Fence Panel With Spacer 6ft wide  x 6ft tall – this is a  panel fence with spacer design at top and will include the below ;
8 x main boards at 180mm high
3 x main boards at 90mm high
1 x Composite post
1 x Steel bracket For post
1 x post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings
12 x spacers

(Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)

Extra Fence Post- you will need this to finish off the last fence panel, you will receive;

1 x Composite post
1 x Steel bracket for post
1 x post cap
4 x Fittings

If you have any further questions or planning to make a lower fence or a full slatted fence please feel free to contact us with your inquiry.